|
|
Accessories
1. Manufacturing range
| Basic
symbol |
d |
D |
| H
204 – H 222 |
20-110 |
24-63 |
| H
304 – H 322 |
20-110 |
24-63 |
| H
2304 – H 2344 |
20-220 |
31-186 |
| H
3024 – H 3044 |
120-220 |
72-128
|
| H
3120 – H 3144 |
100-220 |
76-161 |
| Basic
symbol |
d |
D
|
| AH308
– AH322 |
40-110 |
29
- 68 |
| AH2236
– AH2240 |
180-200 |
105-118 |
| AH2308
– AH2340 |
40-200 |
40-170 |
| AH3024
– AH3040 |
120-200 |
60-102 |
| AH3120
– AH3140 |
100-200
|
64-134
|
| AH3218
– AH3240 |
90-200 |
63-153
|
2.
Applications:
Adapter (H) and withdrawal (AH) sleeves are used when mounting
tapered bore bearings on cylindrical shafts. In this case,
shaft tolerances are larger than in case of bearings seated
directly on the shaft.
3. Technical
execution conditions: Adapter
and withdrawal sleeves are manufactured according to ISO 113.
4. Suggestions:
The tolerance classes recommended for shafts are h9 and h10.
Form and position deviations will be in accordance with tolerance
classes IT5/2 and IT7/2. The tight fit can be done by an axial
displacement of the adapter or withdrawal sleeve. The values
of tighting are estimated by the values of radial clearance
reduction or of axial displacement. The values for spherical
roller bearings radial clearance after mounting are shown
in the Bearings Catalogue.
|
